Connex CX33HPC1 10 Meter Radio, DRX-9010 External Speaker, DRX-6560 4 Pin Noise Cancelling Dynamic Microphone, Combo
Connex CX33HPC1 Audio Upgrade Combo
This is the CX33HPC1 packaged with the two accessories drivers usually buy first: a bigger external speaker to move audio out of the cab noise floor, and a proper noise-cancelling hand microphone. It's the "day-one audio upgrade" bundle for the compact Connex 10 meter.
Who this combo is for
- Drivers running the CX33HPC1 in a loud cab (semi, work truck, older pickup) who want the audio to punch through engine and road noise.
- Operators who don't need a full install kit — antenna and coax are already handled from a prior radio.
- Anyone replacing an older Connex or Cobra 4-pin mobile and wanting a matched audio path.
What's in the bundle
Connex CX33HPC1 10 meter radio
- 45W PEP AM/FM/PA 10-meter mobile in a Cobra 29-size chassis.
Driver Extreme DRX-9010 external speaker
- 15W wedge, 6 ohm, 10 ft detachable low-inductance cable, mounts wherever audio needs to land.
Driver Extreme DRX-6560 4-pin noise-cancelling mic
- Dynamic noise-cancelling, 9 ft cord, wired to match the CX33HPC1's 4-pin jack.
Radio features
- Dual MOSFET finals, 45 Watts PEP
- Front-panel 4-pin microphone jack
- AM / FM / PA selectable
- Blue channel LEDs, large easy-to-read meter
- Variable dimmer, dual echo, variable talkback
- Rear frequency counter jack, external speaker jack, PA speaker jack
- Case 7¼ in W × 2¼ in H × 9 in D; about 11 in from rear heatsink to knob fronts
DRX-9010 speaker specs
- Wedge form factor with heavy-duty mounting bracket included
- 15W nominal power handling, 6 ohm impedance
- 150 Hz – 6 kHz linear response
- 10 ft detachable 20 AWG twisted pair, 3.5mm straight to right angle
- Dimensions 5.0" W × 4.5" D × 4.75" H, weight 2 lbs 5 oz
DRX-6560 microphone specs
- Dynamic noise-cancelling element
- Standard 4-pin 6-conductor Cobra wiring — Pin 1 ground, Pin 2 audio, Pin 3 TX, Pin 4 RX
- Sensitivity −54 dB ± 3 dB (1 V/Pa @ 1 kHz)
- Impedance ~500 Ω, response 55 Hz – 7 kHz
- 9 ft cord with extra-long strain relief, chrome grille, ergonomic body
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
Sibling CX33HPC1 combos
- CX33HPC1 main product page — radio only, no accessories.
- CX33HPC1 truck install combo — antenna, mount, and coax instead of speaker and mic.
Frequently asked questions
Do I need the audio combo if I already have a mic?
The DRX-6560 is a dynamic noise-cancelling upgrade over most stock hand mics. If you already have a comparable noise-cancelling 4-pin mic and just want more volume, buy the DRX-9010 speaker on its own. If you want the matched pair at a bundle price, take the combo.
Will the DRX-6560 plug into my CX33HPC1 directly?
Yes. The CX33HPC1 uses a standard 4-pin front-panel jack with Cobra-style wiring — the same pinout the DRX-6560 is wired for. No adapter or rewiring needed.
Where does the DRX-9010 speaker mount?
The wedge shape and included heavy-duty bracket let you side-mount it to the dash, hang it under the dash, or bolt it to a headliner shelf. The detachable 10 ft cable gives you plenty of reach in a full-size truck cab.
What if I need antenna and coax too?
Take the CX33HPC1 truck install combo instead — that bundle swaps the speaker and mic for a Stryker SR-A10, DRX-3402 mirror mount, and DRX-1518 coax.
Does the CX33HPC1 need an amateur radio license?
An FCC amateur radio license is required to transmit, and General class or higher is required for the radio's full range. Receive-only monitoring does not require a license.
Does this combo ship free?
Yes. Standard shipping is free within the lower 48 states.