Connex CX46 TN1 10 Meter Radio, DRX-9010 External Speaker, DRX-6560 4 Pin Noise Cancelling Dynamic Microphone, Combo
Connex CX46 TN1 10 Meter Radio + DRX-9010 Speaker + DRX-6560 Microphone β Audio Upgrade Combo
This is the CB Radio Supply audio-upgrade bundle built around the Connex CX46 TN1 β a factory-rated 200-plus watt 10 meter amateur radio paired with the DRX-9010 external speaker and the DRX-6560 4-pin noise-cancelling dynamic microphone. Three components chosen to work together: the radio brings the talk power, the DRX-9010 pulls receive audio out of the road noise, and the DRX-6560 gets your voice into the radio cleanly even in a loud Class 8 cab.
Who this combo is for
- Truckers tired of straining to hear over engine and road noise through a small chassis speaker
- Operators upgrading a stock CX46 TN1 and looking for the two accessories that make the biggest audio difference
- Anyone building a new install who wants the radio, speaker, and mic bought together at a bundle price so nothing has to be added later
What's in the bundle
- Connex CX46 TN1 10 meter radio (with stock mic, power cord, mounting bracket, mic clip)
- DRX-9010 Driver Extreme premium external speaker
- DRX-6560 Driver Extreme 4-pin noise-cancelling dynamic microphone
Connex CX46 TN1 β the radio at a glance
- Factory-rated 200+ watts of output power
- Six frequency bands with +10 kHz switch
- Built-in Connex Echo and switchable talkback
- Front-mounted 4-pin microphone jack
- Variable RF power
- Blue channel and meter lighting
- Bottom-facing heatsink
- 11 1/8" long Γ 7 7/8" wide Γ 2 7/8" tall
- 25 amp current draw at full transmit β requires a strong power source
- Requires 1.5:1 or lower antenna SWR
- 1 year manufacturer warranty
DRX-9010 Driver Extreme premium external speaker
The DRX-9010 is a wedge-shape external speaker designed to pull audio out of a truck cab's ambient noise floor without distorting on peaks. It replaces the small chassis speaker that fires down into the dash and gives you receive audio you can actually hear at highway speeds.
| Spec | Value |
|---|---|
| Design | Wedge shape for flexible mounting |
| Mounting | Heavy-duty bracket included |
| Speaker cable | Detachable 10 ft, 20-gauge twisted pair, low-inductance |
| Power handling | 15 watts nominal |
| Impedance | 6 ohms |
| Frequency response | 150 Hz β 6 kHz linear |
| Operating temperature | -4Β°F to +140Β°F |
| Plug | 3.5 mm straight to right angle |
| Dimensions | 5.0" W Γ 4.5" D Γ 4.75" H |
| Weight | 2 lb 5 oz (with bracket and screws) |
DRX-6560 Driver Extreme 4-pin noise-cancelling dynamic microphone
The DRX-6560 replaces the CX46 TN1's stock mic with a noise-cancelling dynamic mic tuned for clarity in high-noise environments. Standard 4-pin wiring means it drops straight into the CX46 TN1's front-mounted mic jack β no rewiring or adapter required.
| Spec | Value |
|---|---|
| Type | Dynamic noise-cancelling |
| Connector | Standard 4-pin, 6-conductor wiring |
| Cord | High-quality 9 ft coil cord |
| Sensitivity | -54 dB Β± 3 dB (1V/Pa @ 1 kHz) |
| Measured impedance | 500 Ξ© Β± 30 Ξ© |
| Frequency response | 55 Hz β 7 kHz (proximity effect compensated) |
| Grill | Rugged chrome-plated |
| Power source | None required β dynamic element |
Standard 4-pin CB wiring:
- Pin 1 (Ground) β shield and blue
- Pin 2 (Audio) β white
- Pin 3 (TX) β red
- Pin 4 (RX) β black
- Yellow wire is unused
Why these three pieces together
- The CX46 TN1 brings the talk power β 200+ watts factory-rated is more than enough to reach a distant repeater or a driver two miles ahead, once the audio chain is doing its job
- The DRX-9010 fixes receive audio β the CX46 TN1's chassis speaker is functional but small; the DRX-9010 gives you a wedge speaker you can aim at your ear and hear over a diesel at 65 mph
- The DRX-6560 fixes transmit audio β the stock 4-pin mic works, but a proper noise-cancelling dynamic element makes a real difference in how you sound on the air, especially in a loud cab
Pro Tune and alignment
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
Licensing
The CX46 TN1 is a 10 meter amateur (ham) radio. Operating on the 10 meter band requires an active FCC amateur radio license (Technician class or higher). This bundle is not FCC Part 95 CB-certified.
Buy the components separately
Each item in this combo is also sold as a standalone product. Buy individually if you already have some of the pieces:
- Connex CX46 TN1 10 meter mobile radio
- Driver Extreme DRX-9010 premium external speaker
- Driver Extreme DRX-6560 4-pin noise-cancelling dynamic microphone
Warranty
The Connex CX46 TN1 carries a 1 year manufacturer warranty. CB Radio Supply also honors a 30-day in-house warranty against defects. Blown finals, pills, or voltage regulators caused by antenna system problems (high SWR) or installation issues are not covered by our in-house warranty but may be covered by Connex's manufacturer warranty on a case-by-case basis. The DRX-9010 and DRX-6560 carry their standard manufacturer warranties against defects.