{"product_id":"rm-italy-kl203p-linear-amplifier","title":"RM Italy KL203P Linear Amplifier with Receive Preamp","description":"\u003cp\u003eThe RM Italy KL203P is a compact 12V linear amplifier with a\nmanufacturer-rated output of 100W. It combines low-drive operation with a\nswitchable 26dB receive preamplifier and front-panel switches for\namplifier power, receive preamplification and AM\/SSB selection.\u003c\/p\u003e\n\u003ch2 id=\"key-features\"\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-rated output:\u003c\/strong\u003e 100W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-drive input:\u003c\/strong\u003e 0.5–10W, with a 10W maximum from the\ndriving radio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable receive preamplifier:\u003c\/strong\u003e 26dB gain with\nelectronic switching, controlled independently from the front panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic transmit\/receive switching:\u003c\/strong\u003e VOX RTX\nswitching specified by RM Italy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC operation:\u003c\/strong\u003e Requires a 12–14V DC supply, with\nmaximum current draw of 10A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact heatsink housing:\u003c\/strong\u003e Approximately 4.92 × 4.72\n× 1.57 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection and indication:\u003c\/strong\u003e Protection against\nreversed supply polarity, a 12A fast-blow fuse and front-panel status\nindication for the amplifier and preamplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManufacturer rating\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRM Italy KL203P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eLinear RF amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e28–29.7 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported modes\u003c\/td\u003e\n\u003ctd\u003eAM, FM and SSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput power\u003c\/td\u003e\n\u003ctd\u003e0.5–10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e12–14V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum current\u003c\/td\u003e\n\u003ctd\u003e10A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceive preamplifier\u003c\/td\u003e\n\u003ctd\u003e26dB, switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmit\/receive switching\u003c\/td\u003e\n\u003ctd\u003eVOX RTX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput VSWR\u003c\/td\u003e\n\u003ctd\u003e1.1–1.5:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse\u003c\/td\u003e\n\u003ctd\u003e12A fast-blow, approximately 0.197 × 0.787 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eApproximately 4.92 inches long × 4.72 inches wide × 1.57 inches\nhigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit weight\u003c\/td\u003e\n\u003ctd\u003eApproximately 1.05 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 id=\"setup-requirements\"\u003eSetup requirements\u003c\/h2\u003e\n\u003cp\u003eCheck the driving radio's output before connecting the amplifier.\nStay within the manufacturer's 10W maximum input; this is not a\nhigh-drive amplifier. Use suitable DC wiring, correct polarity and a\nproperly matched antenna system for the operating frequency.\u003c\/p\u003e\n\u003cp\u003eKeep the heatsink unobstructed and allow adequate ventilation. Do not\ntransmit without a suitable antenna or dummy load connected, and never\nsubstitute a higher-rated fuse. Keep power wiring shorter than 118\ninches and use 16 AWG or heavier wire, following RM Italy's wiring\nguidance. If installed in a vehicle, the vehicle must be stationary\nbefore use.\u003c\/p\u003e\n\u003ch2 id=\"us-operating-restriction\"\u003eUS operating restriction\u003c\/h2\u003e\n\u003cp\u003eExternal RF power amplifiers must not be used to increase the\ntransmitting power of a US CB Radio Service station. The KL203P is not a\nlegal CB power upgrade. Observe all applicable equipment-authorization\nand operating requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandling time:\u003c\/strong\u003e 3–5 business days.\u003c\/p\u003e\n\u003ch2 id=\"frequently-asked-questions\"\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3 id=\"is-the-kl203p-a-radio\"\u003eIs the KL203P a radio?\u003c\/h3\u003e\n\u003cp\u003eNo. The KL203P is an external linear RF amplifier. It does not\nreplace a transceiver or operate as a standalone radio.\u003c\/p\u003e\n\u003ch3 id=\"what-output-power-does-rm-italy-specify\"\u003eWhat output power does\nRM Italy specify?\u003c\/h3\u003e\n\u003cp\u003eRM Italy specifies 100W output. The manufacturer publishes a single\noutput figure for the KL203P rather than separate ratings for each\nmode.\u003c\/p\u003e\n\u003ch3 id=\"how-much-input-power-does-it-require\"\u003eHow much input power does\nit require?\u003c\/h3\u003e\n\u003cp\u003eThe specified drive range is 0.5–10W. Keep the driving radio at or\nbelow the 10W maximum.\u003c\/p\u003e\n\u003ch3 id=\"does-it-include-a-receive-preamplifier\"\u003eDoes it include a\nreceive preamplifier?\u003c\/h3\u003e\n\u003cp\u003eYes. The KL203P has a switchable 26dB receive preamplifier with\nelectronic switching, operated by a front-panel control.\u003c\/p\u003e\n\u003ch3 id=\"what-is-the-difference-between-the-kl203p-and-the-kl203\"\u003eWhat is\nthe difference between the KL203P and the KL203?\u003c\/h3\u003e\n\u003cp\u003eThe KL203P adds the switchable 26dB receive preamplifier. RM Italy\npublishes the same frequency range, input power and output power for\nboth models.\u003c\/p\u003e\n\u003ch3 id=\"what-power-supply-does-it-need\"\u003eWhat power supply does it\nneed?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer specifies 12–14V DC and a maximum current draw of\n10A. Use an appropriate DC supply and correctly rated wiring.\u003c\/p\u003e\n\u003ch3 id=\"can-i-use-it-to-increase-a-cb-radios-transmitting-power-in-the-united-states\"\u003eCan\nI use it to increase a CB radio's transmitting power in the United\nStates?\u003c\/h3\u003e\n\u003cp\u003eNo. US CB Radio Service rules prohibit using an external RF power\namplifier to increase a CB station's transmitting power.\u003c\/p\u003e\n\u003ch3 id=\"how-large-is-the-kl203p\"\u003eHow large is the KL203P?\u003c\/h3\u003e\n\u003cp\u003eConverted from RM Italy's specifications, the unit measures\napproximately 4.92 inches long, 4.72 inches wide and 1.57 inches high,\nand weighs approximately 1.05 lb.\u003c\/p\u003e\n\u003cp id=\"rm-italy-operating-notice\" style=\"color: #c00000;\"\u003e*These units are for industrial, scientific, medical, or export use only. It is a violation of US FCC regulations to operate these units on the Citizens Band or Amateur Radio Services in the United States. Please check regulations in your country before operating these unit.\u003c\/p\u003e","brand":"RM Italy","offers":[{"title":"Default Title","offer_id":68138981065021,"sku":"KL203P","price":97.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/0674\/1262\/files\/rm-italy-kl203p-linear-amplifier-with-receive-preamp-5029688.png?v=1795266849","url":"https:\/\/cbradiosupply.com\/products\/rm-italy-kl203p-linear-amplifier","provider":"CB Radio Supply","version":"1.0","type":"link"}