Connex CX33HPC1 10 Meter Radio, Stryker SR-A10, DRX-3402 Heavy Duty Antenna Mirror Mount, DRX-1518 18 FOOT PREMIUM M213, Combo
Connex CX33HPC1 Truck Install Combo
Everything a driver needs to put the CX33HPC1 on the air from a mirror mount — radio, antenna, heavy-duty mount, and premium coax — packaged at a bundle price. Built for over-the-road trucks, work trucks, and any rig where the antenna lives off the west-coast mirror or side-mount bracket.
Who this combo is for
- OTR drivers spec'ing a new install and starting from bare metal.
- Owner-operators replacing a discontinued mobile (like the CX3400HP) and rebuilding the RF path at the same time.
- Anyone who wants a matched mount and coax package that carries the SR-A10's weight and power without cutting corners.
What's in the bundle
Connex CX33HPC1 10 meter radio
- 45W PEP AM/FM/PA 10-meter mobile in a Cobra 29-size chassis.
Stryker SR-A10 trucker antenna
- 6 gauge silver-plated copper coil, 49" stainless whip, 2-year warranty.
Driver Extreme DRX-3402 mirror mount
- 2.5" wide, .250" aircraft aluminum, stainless Square-Lock hardware — sized for the SR-A10.
Driver Extreme DRX-1518 18 ft M213 coax
- Double-shielded 50 ohm ultra-low-loss coax, PL-259 to PL-259.
Radio features
- Dual MOSFET finals, 45 Watts PEP
- Front-panel 4-pin microphone jack
- AM / FM / PA selectable
- Blue channel LEDs, large easy-to-read meter
- Variable dimmer, dual echo, variable talkback
- Rear frequency counter jack, external speaker jack, PA speaker jack
- Case 7¼ in W × 2¼ in H × 9 in D; about 11 in from rear heatsink to knob fronts
SR-A10 antenna specs
- Modeled after the U.S.A.F. Thunderbolt II profile
- 6 gauge solid copper coil, 100% silver plated
- High-Q coil in double-wall Mobay impact-plastic cover
- 10" and 20" stainless steel shafts
- 49" stainless steel whip
- 10,000 W peak power handling
- 2-year manufacturer warranty
DRX-3402 mount specs
- 2.5" wide, .250" thick aircraft-quality extruded aluminum
- Square-Lock stainless carriage bolts with extended shank — one-wrench install
- Stainless K-Lock nuts with encapsulated washers
- DX239 heavy-duty stud with stainless steel center pin
- ABS-encased stainless female nut, 1" plated aluminum hex base
DRX-1518 coax specs
- 18 ft length, 50 Ω impedance
- 96% tinned copper braided shield plus 100% free-floating aluminum foil shield
- Ultra-low loss M213 Quantum-Flex jacket
- PL-259 connectors both ends
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
Sibling CX33HPC1 combos
- CX33HPC1 main product page — radio only, no accessories.
- CX33HPC1 audio upgrade combo — speaker and noise-cancelling mic instead of antenna/mount/coax.
Frequently asked questions
What kind of mount is the DRX-3402?
It's a heavy-duty mirror mount — the standard OTR truck bracket that clamps to the west-coast mirror arm or side-mount post. The 2.5" wide .250" aluminum body is sized to carry the SR-A10's weight without flex. It is not a magnetic mount and not a through-hole roof mount; for those choices we sell the Stryker SR-A10MM (magnetic) or the SR-A10 trucker paired with a roof through-mount kit separately.
Will 18 ft of coax be enough for my truck?
18 ft reaches from a mirror-mounted antenna to the radio in many trucks. Measure your route first; for longer runs, use a longer coax.
Is the SR-A10 already tuned to my truck?
No antenna arrives tuned to a specific vehicle. SWR needs to be measured and the SR-A10 tip adjusted after install.
Does the CX33HPC1 need an amateur radio license?
An FCC amateur radio license is required to transmit, and General class or higher is required for the radio's full range. Receive-only monitoring does not require a license.
What if I want the speaker and mic upgrade instead?
Take the CX33HPC1 audio upgrade combo — swaps the antenna, mount, and coax for a DRX-9010 external speaker and DRX-6560 noise-cancelling mic.