SuperStar SS-88HL AM/FM/SSB 10-Meter Radio
SuperStar SS-88HL 10-Meter Radio with AM, FM and SSB
The SuperStar SS-88HL combines AM, FM and single-sideband operation with a front-panel frequency counter and dedicated controls for everyday adjustments. High/low transmit power, dual-control echo and noise filtering give amateur operators an all-mode mobile radio with a traditional control layout.
Key Features
- AM, FM, USB and LSB: Select the operating mode that suits your licensed amateur-radio activity.
- Two RF power levels: High/low selection, with manufacturer-rated output of 10 watts AM/FM and 25 watts PEP SSB.
- Frequency counter: Five-digit frequency counter with a dedicated on/off switch and a separate channel display.
- Dual-control echo and talkback: Echo adjustment with talkback active during echo operation.
- Noise blanker and automatic noise limiter: NB/ANL controls for managing unwanted received noise.
- Roger beep: Switch the end-of-transmission tone on or off.
- Fine and coarse clarifier controls: Fine adjustment of 1.5 kHz on receive, plus coarse adjustment of 5.0 kHz on receive and transmit.
- Signal and power meter: Illuminated three-in-one meter shows received signal strength, relative transmit power and SWR.
- PA mode: Separate public-address operating selection.
Specifications at a Glance
| Model | SuperStar SS-88HL |
|---|---|
| Radio class | 10-meter amateur mobile transceiver |
| Transmit modes | AM, FM, USB and LSB |
| Additional mode | PA |
| Manufacturer-rated output | 10 watts AM/FM; 25 watts PEP SSB |
| RF power selection | High / low |
| Frequency display | Five-digit frequency counter with on/off switch |
| Receive noise controls | Noise blanker / automatic noise limiter |
| Audio features | Dual-control echo, talkback during echo, switchable roger beep |
| Microphone connector | Standard four-pin microphone jack |
| Frequency range | 28.315 to 28.755 MHz |
| Channels | 40 |
| Input voltage | 13.8V DC nominal |
| Clarifier ranges | Fine: 1.5 kHz, receive only; coarse: 5.0 kHz, receive and transmit |
| Frequency shift | +10 kHz |
| Radio dimensions | 2-3/8″ H × 7-7/8″ W × 9-1/4″ D |
| Radio weight | 5 lb |
| Antenna connector | UHF, SO239 |
Complete SS-88HL Kits & Combos
- SuperStar SS-88HL Audio Combo with DRX-9010 Speaker and Extra Mic with external speaker and extra four-pin microphone.
- SuperStar SS-88HL Truck Install Combo with SR-A10 Antenna with mirror mount and 18-foot coax.
Browse all SuperStar 10-meter radios and packages.
Amateur Radio Operation
This is a 10-meter amateur radio, not a license-free CB radio. Transmitting requires the appropriate amateur radio license. Use only frequencies and modes permitted by your license.
Pro Tune and Alignment
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
Frequently Asked Questions
What modes does the SuperStar SS-88HL offer?
The SS-88HL supports AM, FM, upper sideband (USB), and lower sideband (LSB), with a separate PA mode.
What power settings does the SS-88HL have?
The SS-88HL has selectable high and low power settings. Manufacturer-rated output is 10 watts AM/FM and 25 watts PEP SSB.
Does the SS-88HL have echo and talkback?
Yes. It has dual-control echo, with talkback active during echo operation.
Does the SS-88HL have a frequency counter?
Yes. The five-digit front-panel frequency counter has its own on/off switch, separate from the channel display.
Is the SS-88HL a license-free CB radio?
No. It is a 10-meter amateur radio, not a license-free CB radio. Transmitting requires the appropriate amateur radio license and operation within the frequencies and modes permitted by your license.
Can I add Pro Tune and Alignment?
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
What are the SS-88HL radio dimensions and weight?
The radio measures 2-3/8″ high × 7-7/8″ wide × 9-1/4″ deep and weighs 5 lb. Allow additional installation clearance for plugs, wiring and mounting.