SuperStar SS-99VHP 10 Meter Radio, Stryker SR-A10 Antenna, DRX-3402 Heavy-Duty Mirror Mount, DRX-1518 18ft Premium M213 Coax, Combo
Everything you need to get on the air — minus the radio pole. This truck install combo pairs the SuperStar SS-99VHP high-powered 10 meter radio with a Stryker SR-A10 fiberglass antenna, a DRX-3402 heavy-duty mirror mount, and 18 feet of DRX-1518 premium M213 coax. Order today, install this weekend, and you're transmitting on 10 meters with a serious signal.
What's Included
- SuperStar SS-99VHP High Powered 10 Meter Radio — ~200W PEP, AM/USB/LSB/PA, echo, talkback, voice changer, multi-color display, RX clarifier, and noise-cancelling 4-pin mic in the box.
- Stryker SR-A10 CB / 10 Meter Antenna — heavy-duty fiberglass whip built for high-power radios, 2-year warranty against warping and cracking.
- DRX-3402 Heavy-Duty Mirror Mount — stainless steel bracket sized for semi truck mirror arms and heavy trucks; no drilling required for most rigs.
- DRX-1518 18ft Premium M213 Coax — low-loss 50-ohm coax with PL-259 connectors, sized right for cab-to-mirror runs.
Why This Combo
- Fewer parts to source. Antenna, mount, and coax are already matched — no last-minute trips to find the right connector or length.
- Built for the power. The SR-A10 and DRX-1518 are both rated for the SS-99VHP's ~200W output. No power-handling bottleneck between the radio and the antenna.
- Ready for tuning. Use the SS-99VHP's built-in SWR meter to peak the SR-A10 for your rig in minutes.
Setup Notes
The SS-99VHP is a 10 meter amateur radio and requires a valid FCC amateur (HAM) license for on-air transmission. Every kit ships tuned from the factory. To have your radio peaked and aligned for maximum output before shipping, add the 10 Meter Pro Tune and Alignment service.
Have a Question?
Not sure if this fits your mirror or truck? Give us a call — we spec these installs every day. Every combo ships free within the U.S. from CB Radio Supply.