Stryker SR-655HPC+ 10 Meter Radio Combo Kit for Truckers — With External Speaker & Noise-Cancelling Mic

What's in this combo: Stryker SR-655HPC+ 10 Meter Radio + DRX-9010 Driver Extreme Premium External Speaker + DRX-6560 4-Pin Noise-Cancelling Dynamic Microphone. Everything you need to get on the air in your rig, out of the box.

Who This Combo Is For

This is a purpose-built 10 meter radio kit for licensed amateur radio operators driving semi trucks, pickups, and heavy-duty vehicles. If you spend hours behind the wheel and want a mobile 10-meter setup that punches through road noise, diesel engine rumble, and RF congestion on the highway, this is the combo we recommend. Owner-operators running Peterbilt, Kenworth, Freightliner, Volvo, Mack, and International trucks will find the SR-655HPC+ fits standard OEM radio cutouts, while the DRX-9010 wedge speaker and DRX-6560 noise-cancelling mic solve the two biggest audio problems truck cabs create: engine noise going out, and CB traffic getting drowned out coming in.

You'll need a valid FCC Technician-class amateur radio license to transmit on this radio — it's a 10-meter ham radio, not a CB.

Why We Picked These Three Products

• The Stryker SR-655HPC+ is Stryker's 100-watt PEP 10-meter radio with an up-armored receiver that filters nearby-frequency interference — the exact problem you hit driving through truck stops, convoys, and dense highway corridors. Its short 9.25″ chassis fits most factory truck radio cutouts.
• The DRX-9010 external speaker mounts on the dash, headliner, or A-pillar where the radio itself won't fit, and it's tuned for voice frequencies (150 Hz–6 kHz) so voice cuts through diesel engine noise, road noise, and HVAC.
• The DRX-6560 noise-cancelling mic blocks the sound of your engine, wind, HVAC, and cab chatter from leaving your mic — so the driver on the other end hears your voice, not your cab.

Buying these three separately, you'd have to verify the mic pinout matches the radio, confirm the speaker jack matches, and gamble on whether the audio profiles complement each other. We've done that work. Everything here plugs in and works.

What's Included

Also included: 10-foot speaker cable, heavy-duty speaker mounting bracket, 9-foot mic cord, mounting hardware.

Stryker SR-655HPC+ 10 Meter Radio

The Stryker SR-655HPC+ is a 100-watt PEP AM/FM 10-meter amateur radio built for mobile and base use. The short chassis (9.25″ x 7.875″ x 2.375″) fits most factory truck cutouts. It ships with an up-armored receiver that rejects nearby-frequency interference, NOAA weather channels with alert, variable power control, and a 7-color LED display with dimmer for comfortable nighttime viewing.

Key features: 100W PEP · AM/FM · NOAA weather with alert · Variable Power & Talkback · PA function · 7-color display with dimmer · Advanced Clarifier · MIC/RF Gain · Auto-calibrating SWR · Digital multifunction meter · 6-digit frequency counter · Up-armored receiver · Six roger beeps · Channel scan · Instant channels 9/19 · PC programmable · 9.25″ x 7.875″ x 2.375″.

DRX-9010 Driver Extreme Premium External Speaker

The DRX-9010 is a wedge-shape external CB and 10-meter speaker designed for tight mounting locations in trucks — under the dash, above the visor, or against the A-pillar. It handles 15 watts nominal and is tuned specifically for voice reproduction, not music, so radio traffic comes through clean and intelligible even at highway speeds.

Specifications: Wedge shape · Heavy-duty bracket included · Detachable 10 ft. 20-gauge twisted pair cable · 15W nominal · 6 ohms · 150 Hz–6 kHz linear voice-tuned response · Operating -4°F to +140°F · 3.5mm straight-to-right-angle plug · 5.0″ W × 4.5″ D × 4.75″ H · 2 lbs. 5 oz. Compatible with any CB, 10 meter, or ham radio with a 3.5mm external speaker jack.

DRX-6560 Driver Extreme 4-Pin Noise-Cancelling Dynamic Microphone

The DRX-6560 is a dynamic noise-cancelling mic engineered for the noisy environment of a truck cab. An internal diffuser blocks breath pops and wind, and the dynamic element rejects ambient sound (engine, HVAC, road noise) so only your voice transmits. Ergonomically contoured for one-handed thumb-on-key operation and needs no battery — just plug it in.

Specifications: Dynamic noise-cancelling · Chrome-plated grill · 9-foot cord · Extra-long strain relief · Internal diffuser · Standard 4-pin/6-conductor wiring (Pin 1 Ground: Shield & Blue; Pin 2 Audio: White; Pin 3 TX: Red; Pin 4 RX: Black; Yellow unused) · Sensitivity -54 dB ±3 dB · 500 ohms ±30 ohms · Frequency response 55 Hz–7 kHz.

Optional: 10 Meter Pro Tune and Alignment Service ($50)

For an extra $50 at checkout, we'll bench-tune your SR-655HPC+ before shipping. Our techs peak the finals for maximum clean output, align the receiver for best sensitivity, verify the frequency counter, and confirm all modes are performing to spec. Highly recommended for over-the-road drivers who need every dB of clean output they can get.

Frequently Asked Questions

What's included in the Stryker SR-655HPC+ combo kit?
This combo includes three products: the Stryker SR-655HPC+ 100-watt 10-meter amateur radio, the DRX-9010 Driver Extreme Premium External Speaker with mounting bracket and 10-foot cable, and the DRX-6560 4-pin noise-cancelling dynamic microphone with 9-foot cord. All three are pre-verified to work together out of the box.

Can the Stryker SR-655HPC+ be used as a CB radio?
No. The Stryker SR-655HPC+ is a 10-meter amateur (ham) radio, not a CB radio. It's designed for licensed amateur radio operators transmitting on the 10-meter band (28 MHz) and is not FCC Type-Accepted for use on CB (27 MHz Citizens Band) frequencies in the United States. You'll need at least an FCC Technician-class amateur radio license to transmit on the SR-655HPC+.

Do I need a license to use this 10 meter radio combo?
Yes. To legally transmit on the SR-655HPC+, you need at least an FCC Technician-class amateur radio license. Study materials are widely available online and the exam runs about $15. Many truckers upgrade from CB to a 10-meter license specifically to run higher-power radios like the SR-655HPC+.

Is this combo good for truck drivers?
Yes — that's exactly who we built this kit for. The SR-655HPC+ fits standard truck radio cutouts, the DRX-9010 wedge speaker mounts in tight cab locations where the radio itself won't fit, and the DRX-6560 noise-cancelling mic blocks engine, wind, and HVAC noise from your transmitted audio. Suited to Peterbilt, Kenworth, Freightliner, Volvo, Mack, International, and heavy-duty pickup installs.

What microphone works best with the Stryker SR-655HPC+?
The SR-655HPC+ uses a standard 4-pin, 6-conductor microphone connector. The DRX-6560 in this combo is our recommended pairing for truckers because it's a dynamic noise-cancelling design that rejects cab noise. Other 4-pin mics from Stryker, Astatic, and Road King are also compatible — always verify pinout before swapping.

Is the DRX-9010 external speaker good for a truck cab?
Yes. The DRX-9010 is one of our top external speaker picks for truckers because of its wedge shape (mounts in tight spots), voice-tuned 150 Hz–6 kHz frequency response, and 15-watt handling that stays clean at highway volume. Its -4°F to +140°F operating range handles seasonal cab extremes.

Does the DRX-9010 speaker work with other radios?
Yes. The DRX-9010 uses a standard 3.5mm external speaker jack and works with any CB radio, 10-meter radio, or amateur radio that has an external speaker output.

Is the DRX-6560 microphone compatible with other radios?
Yes. The DRX-6560 uses standard 4-pin, 6-conductor wiring, compatible with most Stryker radios and other brands using the same pinout (many Galaxy, Connex, and RCI radios). Always verify your radio's pin configuration before use.

Can I buy the radio, speaker, and mic separately?
Yes, each component can be purchased individually at CB Radio Supply. The advantage of the combo is that we've pre-verified compatibility and audio matching — you don't have to research pinouts, jack types, or frequency response curves yourself.

How much power supply do I need for a base station install?
Since the SR-655HPC+ pulls up to 20+ amps at 100W PEP transmit, you'll want a regulated DC power supply rated for at least 25–30 amps continuous for a home base install. For a truck install, wire directly to the battery through a fuse — do not run it off the accessory circuit at full power.

What antenna do I need for this combo?
This kit does not include an antenna. For a truck install with a permanent mount, we recommend the Stryker SR-A10 10-meter antenna. For a temporary or magnet-mount install, the Stryker SR-A10MM magnetic mount version is our go-to. For a home base station, a 10-meter vertical or dipole cut for 28 MHz will get you on the air. The SR-655HPC+ uses a standard SO-239 antenna connector.

Where to Buy the Stryker SR-655HPC+ Combo Kit

At CB Radio Supply, we've been curating 10-meter and CB radio combos for professional drivers, owner-operators, and licensed hams for years. Every component in our combo kits is chosen because we've verified it works — not because it fits in the same shipping box. If you're running a truck and want a 10-meter combo that's ready to install and dial in, this is the setup we recommend. Contact us if you have questions about your specific truck's install layout or antenna requirements.