Mirage MX-36HP6 10 Meter Radio, Stryker SR-A10 Antenna, DRX-3402 Heavy Duty Mirror Mount, DRX-1518 18 Foot Premium M213 Coax Combo

Sold out

$437.97 - $437.97

$437.97

$437.97 - $437.97

$437.97

Availability:

Out of stock

Mirage MX-36HP6 + SR-A10 + DRX-3402 + DRX-1518 — Complete 10-Meter Truck Install Combo

A complete over-the-road 10-meter install kit: the Mirage MX-36HP6 60W-PEP 10-meter amateur radio, the Stryker SR-A10 10-meter mobile antenna, the DRX-3402 heavy-duty magnum mirror mount, and 18 feet of DRX-1518 premium M213 super-flex coax. Everything you need to put a 10-meter mobile on the air with a properly matched antenna system.

Note: this is a 10-meter amateur radio. Operating it on-air requires an FCC amateur radio license (Technician-class minimum for 10-meter operation in the U.S.).

Why this combo

The MX-36HP6 is only as good as its antenna system. Feed 60 watts into a poorly matched CB whip cut for 27 MHz and you'll run high SWR and get modest range for the power expended. This kit pairs the MX-36HP6 with a 10-meter-tuned Stryker antenna on a heavy-duty mirror mount, using premium M213 coax rated well above the radio's output. All four pieces are matched for a clean, low-SWR install in the 28–29 MHz band.

Mirage MX-36HP6 60 Watt 10-Meter Amateur Radio

10-meter amateur transceiver — 28.765–29.205 MHz, 40 channels
60 Watts PEP AM output on the Ranger Communications chassis
Built-in SWR meter, variable RF power, RF gain, and MIC gain
ANL and Noise Blanker for cleaner receive in electrically noisy environments
Adjustable Echo, Talkback with on/off switch
Channel 9 & 19 priority, +10 KC switch, 3-position dimmer
Front-panel 4-pin microphone jack, PA function and PA jack
13.8 VDC 3-pin power · 4W audio output into 8 Ω
Compact Cobra 29–size chassis: 7-3/8″ W × 8-3/4″ D × 2-1/4″ H · 4.2 lb
Includes Premium SRA-198 Noise-Canceling Microphone, mic clip, power cord, mounting bracket, hardware
1-year Ranger Communications manufacturer warranty

Stryker SR-A10 — 10-Meter / CB Mobile Antenna

Dual-band 10-meter / 11-meter tuning — covers the MX-36HP6's 28.765–29.205 MHz range
Fiberglass shaft with brass tunable tip for fine SWR adjustment at install
Power handling well above the MX-36HP6's 60W output — long-life radiator
SO-239 base connector, 3/8″ × 24 stud (fits the DRX-3402 mount)
2-year Stryker guarantee

DRX-3402 — Magnum Heavy-Duty Mirror Mount

Double-slotted design for use on tractor mirrors, sport bars, and heavy-duty bracketry
3/8″ × 24 threading (fits the SR-A10 and most 10-meter mobile antennas)
Chromed steel construction — corrosion-resistant for over-the-road duty
Fits standard 3/4″–1″ mirror arms on Peterbilt, Kenworth, Freightliner, Volvo, Mack, and International tractors
Includes hardware for installation

DRX-1518 — 18 ft Premium M213 Super-Flex Coax

18 ft length — right-sized for a mirror-mount to under-dash run in most trucks and full-size pickups
Premium M213 double-shielded construction — low loss at 10-meter frequencies
Super-flex jacket handles routing bends without kinking
PL-259 connectors on both ends (matches the MX-36HP6 rear SO-239 and the SR-A10 antenna base)

Install and tuning

Antenna installation is where the whole system either sings or squawks. Every antenna needs to be SWR-checked at install — mounting location, ground plane, and coax routing all affect the match. We verify SWR at antenna installation on any local install; if you're installing yourself, an inline SWR meter or an antenna analyzer at the antenna is essential. Don't transmit into an unverified antenna system.

Coax should be routed away from ignition wiring, spark plugs, and alternator leads. Ground the antenna mount to bare vehicle metal for best radiation efficiency. Keep the coax run tidy — 18 ft is optimal for a mirror-mount install in a standard cab.

10-meter licensing

The 10-meter amateur band requires an FCC amateur radio license — Technician class or higher. See our 10-meter radio license guide for FCC and ARRL testing resources. This radio should not be operated on air until the operator holds a valid amateur radio license.

Recommended add-ons

DRX-6560 4-pin noise-cancelling dynamic microphone — upgrade path from the stock mic (correct 4-pin wiring for the MX-36HP6)
DRX-9010 Driver Extreme premium external speaker — pulls incoming voice off-axis in a noisy cab
Pro tune and alignment — don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.

Buy the components separately

Prefer to build the bundle piece by piece or already own one of these? Every component is available on its own:

Warranty

The Mirage MX-36HP6 is backed by Ranger Communications' 1-year manufacturer warranty. The Stryker SR-A10 carries a 2-year Stryker guarantee. The DRX-3402 mount and DRX-1518 coax are covered by Driver Extreme's manufacturer warranty.

Questions about compatibility, licensing, or install? Contact CB Radio Supply — we work with amateur operators and Ranger dealers every day.

Tune up Report

$25.00