President George FCC + DIGIMIKE Combo — the full President upgrade over your factory mic

This bundle pairs the top-of-line President George FCC AM/FM/SSB CB radio with President Electronics' own DIGIMIKE 6-pin noise-reducing microphone. You get the George's full 40-channel AM/FM/SSB radio plus a factory mic upgrade that adds 5-level digital noise reduction and remote UP/DOWN channel control right at your fist — cleaner outbound audio, faster channel changes, no soldering.

Both pieces are genuine President Electronics factory parts, so the mic is a plug-and-play match for the George's front 6-pin jack.

Who this combo is for

• Over-the-road drivers who want SSB range plus a mic that cuts diesel cab noise
• Owner-operators who already know they'll want a better mic than the stock hand mic
• President loyalists building a matched-brand rig from mic to radio
• DXers and SSB fans who talk long shifts and want cleaner outbound audio without dropping in an amplified base mic

President George FCC — 40-Channel AM/FM/SSB CB Radio

Top of the President CB lineup. 40 channels of AM, FM, and full SSB (USB/LSB) plus NOAA weather with alert.

President DIGIMIKE — 6-Pin Digital Noise-Reducing Microphone

The DIGIMIKE is President Electronics' factory upgrade over the George's stock hand mic. It adds selectable digital noise reduction and remote UP/DOWN channel changes so you're not reaching for the front panel while you're moving.

• Genuine President 6-pin mic — direct plug into the George's front mic jack
• 5-level NRC (Noise Reduction Circuit) — dial noise reduction to match cab conditions
• UP / DOWN channel buttons on the mic body
• Push-to-Talk (PTT) with VOX-mode compatibility
• Coiled cord with quality retainer clip

Why buy this as a combo instead of separately

• Matched-brand pairing. Both pieces come out of President Electronics — no pin-count adapters, no mic-wiring surprises.
• Front-panel goes away. With UP/DOWN on the mic body plus the George's memory channels, your hand stays on the mic and off the front dial.
• Cleaner outbound audio. The DIGIMIKE's NRC drops the road, wind, and engine noise your stock mic would otherwise put on the air.
• Bench-tune the whole rig together. Add Pro Tune at checkout and both radio and mic gain get set to the George's factory service-manual targets in one pass.

Buy the components separately

Prefer to build this rig one piece at a time, or already own one of these items? Both products are also available as standalone listings:

• President George FCC AM/FM/SSB CB Radio — main radio product page
• President DIGIMIKE 6-Pin Noise Reducing Microphone — standalone mic

Recommended add-ons

• President Virginia magnet-mount antenna — matched-brand antenna, extends warranty to 5 years
• Stryker SR-A10 antenna — heavier-duty option for over-the-road use
• DRX-3402 heavy-duty mirror mount
• DRX-1518 18-ft premium M-213 coax
• DRX-9010 external speaker — pairs with the George's rear speaker jack
• Pro Tune and Alignment — bench-tune the George to factory service-manual targets

What's in the box

• President George FCC CB radio (base unit)
• Stock President 6-pin hand microphone
• DC power cord
• Mounting bracket and hardware
• Owner's manual
• Plus: President DIGIMIKE 6-pin noise-reducing microphone with UP/DOWN control

Pro Tune before it ships

Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.

License and installation notes

No FCC license is required to operate a CB radio in the United States. The George FCC is Part 95 certified for the 11-meter Citizens Band and is legal to install in any personal vehicle, work truck, or base station.

The DIGIMIKE plugs into the George's front 6-pin mic jack — no adapter required. If you're using the George as a base station, plug the DIGIMIKE into the front jack and keep your stock hand mic as a backup.

Warranty

The George FCC carries a 2-year President warranty, extended to 5 years when purchased with a President antenna. The DIGIMIKE carries its own President accessory warranty.

Frequently asked questions

Does the DIGIMIKE work with any President CB radio?
Yes — the DIGIMIKE is designed for the President 6-pin mic wiring, which the George FCC (and most other current President CBs) uses. It plugs directly into the front mic jack, no adapter or rewiring needed.

Do I need to keep the stock hand mic?
No, but many drivers keep the stock mic as a spare in the glovebox. The DIGIMIKE becomes your primary mic.

What does the DIGIMIKE's NRC do?
NRC is a digital Noise Reduction Circuit built into the mic body. It samples ambient cab noise (engine, wind, road, HVAC) and filters it before your voice is transmitted. Five selectable levels let you dial it in for a quiet pickup truck or a loud diesel cab.

Does this combo need to be tuned?
The George FCC ships factory-set. Adding the Pro Tune option at checkout gets the radio bench-tuned to the manufacturer's service-manual targets before it ships — recommended if you want peak performance out of the box. SWR itself is verified at antenna install, not on the radio.

Do I need an FCC license for this radio?
No. CB radio has not required a license in the United States since 1983. The George FCC is Part 95 certified.

Can I add a President antenna and still get the extended warranty?
Yes — buy the George FCC and a President antenna in the same order (this combo qualifies if you add a Virginia antenna) and the radio warranty extends to 5 years.

Order the George FCC + DIGIMIKE combo

Get the top of the President CB lineup and the factory mic upgrade in one purchase — matched-brand, plug-and-play, ready to bench-tune. Browse more President radios in the President CB radios collection.