President Richard II 10-Meter Radio + DIGIMIKE Combo
Pair the President Richard II AM/FM amateur radio with a President DIGIMIKE six-pin microphone. This package is for operators who want the Richard II with an additional microphone offering five levels of noise reduction and UP/DOWN controls, without adding an antenna system or external speaker.
Included components
| Component | Quantity |
|---|---|
| President Richard II AM/FM Amateur Radio | 1 |
| President DIGIMIKE Six-Pin Microphone | 1 |
Microphone pairing
The DIGIMIKE is designed for President six-pin CB and 10-meter radios and provides five levels of noise reduction, UP/DOWN controls and a push-to-talk button. It is an additional microphone: the Richard II's factory electret UP/DOWN microphone remains included.
The Richard II supports compatible electret and dynamic microphones through its microphone-type menu. Select the appropriate type for the microphone connected to the radio.
Richard II radio features
- AM/FM operation: 10-meter and 12-meter amateur coverage; no SSB.
- Manufacturer-listed output: 13W AM carrier, approximately 50W PEP AM and 40W FM.
- Audio controls: Adjustable RF power, microphone gain, talkback and echo.
- Noise reduction: Independently adjustable five-level transmit and receive NRC.
- Operating aids: Built-in SWR measurement, ASC/manual squelch, frequency display and front USB-C charging.
- Manufacturer dimensions: 7.283 W × 7.480 D × 2.165 H inches / 185 × 190 × 55 mm.
Check mounting clearance and power requirements before installation. The radio requires a suitable 13.8V DC supply and must not be connected directly to 24V.
No antenna, antenna mount or coax is included. Use an antenna system designed and adjusted for your intended operating frequencies, and check SWR before transmitting.
Compare Richard II packages
- Richard II radio only: Choose the radio without the additional package components.
- Richard II + BT MIKE: Radio with a BT MIKE.
- Richard II Audio Combo: Radio with a DIGIMIKE and external speaker.
- Richard II Truck Combo: Radio with an SR-A10 antenna, mount and coax for 10-meter use.
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
Frequently asked questions
What is included in this package?
One President Richard II AM/FM Amateur Radio, one President DIGIMIKE Six-Pin Microphone. The radio's factory microphone remains included.
Does this package replace the factory microphone?
No. The factory electret UP/DOWN microphone remains included with the radio.
What license do I need?
In the United States, AM/FM voice operation on these amateur bands requires General-class privileges or higher, or an existing Advanced-class license, on permitted frequencies and modes. Technician 10-meter voice privileges are SSB-only; the Richard II does not have SSB.
Does the Richard II have single sideband?
No. It operates in AM and FM, without USB or LSB modes.
What are the radio's power figures?
President lists 13W AM carrier, approximately 50W PEP AM and 40W FM. These are separate mode-specific ratings.
Does the package include an antenna system?
No. The antenna, mount and coax are separate purchases.
Does the included accessory use the right microphone connection?
Yes. President specifies DIGIMIKE for its six-pin CB and 10-meter radios. The Richard II uses a front six-pin President connection. Follow the radio and accessory setup instructions.