A complete 10 meter mobile setup with upgraded audio out and voice in: the Ranger RCI-99N2 200W+ PEP amateur radio, the DRX-9010 Driver Extreme premium external speaker, and the DRX-6560 Driver Extreme 4-pin noise-canceling dynamic microphone. Everything you need to hear clearly and be heard clearly on 10m sideband — with the 99N2's factory amp deck delivering the power to reach out.

Why this combo

The 99N2 by itself is a strong package — 200W+ PEP AM/SSB, integrated amp on/off switch, twin-fan cooling, and Ranger's SRA-198NC noise-canceling mic in the box. This combo trades up on both audio ends: the DRX-9010 external speaker pulls voice clarity above road noise, and the DRX-6560 gives you a warmer, better-diffused voice signature than the stock stick mic. If you spend time on 10m sideband in a truck cab, the audio upgrades pay for themselves in intelligibility.

Ranger RCI-99N2 — 10 meter mobile amateur radio

• AM / USB / LSB / PA modes (no FM, no CW)
• 200W+ PEP AM/SSB output with eight IRF-520 MOSFET finals
• Factory AMP ON/OFF switch — bypass the amp deck for local traffic, engage it for DX
• 12-band coverage across 24.265 – 29.655 MHz
• 5-digit LED frequency counter, 7-color selectable backlight, brightness dimmer
• Built-in auto-calibrating SWR meter with high-SWR warning light
• Fine clarifier (RX only, ±1.5 kHz)
• Echo/reverb, switchable talkback, NB/ANL noise filtering
• Twin internal cooling fans for continuous-duty operation
• Includes Ranger SRA-198NC 4-pin chrome noise-canceling mic (swap-in ready — the DRX-6560 in this combo becomes the primary mic)
• Dimensions: 7.875" W × 9.25" D × 2.25" H
• 1-year factory warranty through Ranger USA

DRX-9010 — Driver Extreme Premium External Speaker

• Wedge design fits under-dash or on-console mounting
• Heavy-duty mounting bracket included
• Detachable 10 ft. 20-gauge twisted-pair speaker cable
• Power handling: 15 W nominal
• Impedance: 6 ohm
• Frequency response: 150 Hz – 6 kHz linear
• Operating temperature: –4°F to +140°F
• 3.5 mm straight-to-right-angle cord plug (matches the 99N2's external speaker jack)
• Dimensions: 5.0" W × 4.5" D × 4.75" H · Weight: 2 lb 5 oz

DRX-6560 — Driver Extreme 4-Pin Noise-Canceling Dynamic Microphone

• Dynamic noise-canceling element — cuts road, engine, and wind noise on transmit
• Ergonomic contoured switch, comfortable in extended use
• Rugged chrome-plated grill, extra-long strain relief
• 9 ft cord
• Acoustically tuned for natural voice with an internal diffuser to eliminate breath pops
• Standard 4-pin, 6-conductor wiring (plug-and-play with the 99N2's 4-pin mic jack)
• Sensitivity: –54 dB ± 3 dB (1V/Pa @ 1 kHz)
• Impedance: 500 ohm ± 30 ohm
• Frequency response: 55 Hz – 7 kHz (proximity-effect compensated)
• No battery or power source required

Setup notes

Both accessories are plug-and-play with the 99N2 — no adapters or wiring changes needed. Connect the DRX-9010 to the external speaker jack on the back of the radio. Swap the stock SRA-198NC mic for the DRX-6560 at the front-panel 4-pin jack. If you want to keep the SRA-198NC as a backup, both are 4-pin standard and interchangeable.

10 meter licensing

The 10 meter amateur band requires an FCC amateur radio license (Technician class or higher). See our 10 meter radio license guide for FCC and ARRL testing resources.

Buy the components separately

Each item in this combo is also sold as a standalone product. Buy individually if you already have some of the pieces:

• Ranger RCI-99N2 200 watt SSB/AM 10 meter amateur transceiver
• Driver Extreme DRX-9010 premium external speaker
• Driver Extreme DRX-6560 4-pin noise-cancelling dynamic microphone

Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.