Stryker SR-497HPC AM/FM 10 Meter Radio

The Stryker SR-497HPC is a full-size 10-meter amateur radio with AM, FM, and PA modes, variable RF power, talkback, and front-panel echo controls. It does not include SSB or NOAA weather reception. Choose it for its operating modes and controls, and measure your mounting space before ordering.

Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.

Quick Spec Snapshot

• Modes: AM / FM / PA; no SSB.
• Weather reception: no built-in NOAA weather channels.
• Power: 100+ watts PEP (manufacturer rating).
• Controls: variable RF power, RF gain, microphone gain, squelch, talkback, echo volume and delay.
• Display: selectable-color illuminated faceplate and adjustable brightness.
• Chassis: 7-7/8 inches wide × 2-3/8 inches high × 9-1/4 inches deep, as listed by Stryker; allow additional installation clearance.
• Antenna connector: UHF SO-239, accepting a PL-259 coax connector.
• Noise controls: noise blanker and automatic noise limiter.
• Antenna warning: AWI indicator.

Why Truckers and Base Operators Choose the SR-497HPC

The SR-497HPC provides separate controls for transmit audio, receive gain, and monitoring. Its front-panel layout lets you adjust these functions without treating one control as a substitute for another.

• Variable RF power: adjusts transmitter output; follow the operating manual for setup.
• Illuminated faceplate: selectable colors and a dimmer help tailor the display to the installation.
• RF gain and squelch: separate adjustments for receive gain and the background-noise threshold.
• Echo and talkback: separate controls for echo effects and monitoring your own transmitted audio.
• NB/ANL: filtering controls intended to reduce certain types of receiver noise.
• AWI: warns of an antenna-system problem; it does not replace checking and correctly adjusting the antenna system.

Stryker Family Comparison: Which 10 Meter Fits Your Install?

Choose by the features you need and the measured installation space, not by a general “best radio” claim.

• AM/FM/PA with a full-size control layout: consider this SR-497HPC.
• Single sideband: the SR-955HPC+ adds USB/LSB capability.
• A narrower, lower-profile chassis: compare the SR-447HPC2, then check rear clearance and mounting requirements.
• Another current AM/FM option: review the SR-655HPC+ listing for its exact features.

For beginner questions and package selection, read our Stryker radio buying guide.

Truck Fitment: Where the SR-497HPC Mounts

Stryker lists the SR-497HPC chassis at 7-7/8 inches wide, 2-3/8 inches high, and 9-1/4 inches deep. Those dimensions are a starting point, not a vehicle-specific fit guarantee.

Measure the opening and allow room for the bracket, heatsink, connectors, cable bends, and ventilation. Check the individual vehicle and mounting hardware; do not assume that every model year or trim of a truck has the same radio space.

What's in the Box

• Stryker SR-497HPC transceiver
• Microphone
• DC power cord with inline fuse
• Mounting bracket with hardware
• Microphone hanger with hardware

These components are listed in the Stryker SR-447/497 manual. Use the power lead and fuse specified for your radio; do not substitute a cable based only on connector appearance.

Controls at a Glance

RF power and talkback

The RF power control adjusts transmitter output. The monitor, or talkback, control adjusts how loudly you hear your own audio through the radio.

Volume, squelch, and RF gain

Volume controls listening level. Squelch sets the threshold for opening the receiver, while RF gain changes receive gain; these are separate adjustments.

Microphone gain and echo

Microphone gain sets the transmit-audio level. Echo volume and delay control the effect; follow the manual when setting up the radio and microphone.

Modes, filters, and display

The mode switch selects AM, FM, or PA. Other front-panel controls provide NB/ANL filtering, roger-beep selection, display color and dimming, and a +10 kHz frequency shift. Use the model-specific operating guide for the control layout and instructions.

Rear Connections

The UHF SO-239 antenna jack accepts a PL-259 coax connector. Match the antenna system to your operating frequency and installation, and use the external-speaker and PA connections only with suitable equipment.

Leave room behind the radio for plugs, cable bends, and ventilation. Check replacement power leads and accessories against the exact model before connecting them.

Recommended Accessories

Choose accessories for your installation and confirm compatibility before connecting them.

• Driver Extreme DRX-6560: the 4-pin noise-cancelling dynamic microphone included in our SR-497HPC audio combo.
• Stryker SR-A10 antenna: check the mounting system and adjust the antenna for the intended operating frequency.
• Gear Keeper RT4: a retractable microphone keeper for suitable installations.

Complete SR-497HPC Kits & Combos

• Audio combo: the SR-497HPC with DRX-9010 speaker and DRX-6560 microphone adds an external speaker and noise-cancelling microphone.
• Antenna installation package: the SR-497HPC with SR-A10, DRX-3402 mount, and DRX-1518 coax adds an antenna system. Check vehicle-specific mounting and power requirements before ordering.

Already have suitable accessories? Choose the standalone radio. To compare other models and packages, browse our Stryker radio collection.

Stryker SR-497HPC FAQ

Does the Stryker SR-497HPC have SSB?

No. The SR-497HPC is an AM/FM/PA radio. For USB and LSB single sideband, consider the Stryker SR-955HPC+.

Does the SR-497HPC have NOAA weather reception?

No. NOAA weather channels are not built into the SR-497HPC.

How much power does the SR-497HPC produce?

Stryker lists 100+ watts PEP for the SR-497HPC.

What are the SR-497HPC dimensions?

Stryker lists the chassis as 7-7/8 inches wide, 2-3/8 inches high, and 9-1/4 inches deep. Allow additional room for the bracket, heatsink, connectors, cable bends, and ventilation.

Will the SR-497HPC fit my truck's overhead opening?

Fit depends on the particular vehicle and mounting arrangement. Measure the complete installation space and compare it with the radio and hardware; the model name of a truck alone does not establish fit.

What is included with the SR-497HPC?

The Stryker SR-447/497 manual lists the transceiver, microphone, DC power cord with inline fuse, mounting bracket with hardware, and microphone hanger with hardware.

How does the 10K switch work?

The 10K switch shifts the operating frequency by +10 kHz.

What is the SR-497HPC warranty?

Stryker's published SR-447/497 manual and its model-specific warranty listing state a one-year limited warranty. Check the manufacturer's current terms and the documentation supplied with your radio for registration and coverage requirements.

Should I choose the radio alone, the audio combo, or the antenna package?

Choose the radio alone if you already have suitable accessories. The audio combo adds the DRX-9010 speaker and DRX-6560 microphone; the antenna package adds the SR-A10 antenna, DRX-3402 mount, and DRX-1518 coax. Check each listing for exact contents.