Uniden Bearcat 880FM + Stryker SR-A10 Truck Install Combo
This Bearcat 880FM truck installation combo pairs the AM/FM CB radio with a threaded Stryker SR-A10 antenna, Driver Extreme DRX-3402 mirror mount, and DRX-1518 coax cable. It is intended for a suitable mirror-mount installation, not a magnetic-base antenna setup.
The Uniden Bearcat 880FM provides 40-channel AM/FM CB operation, seven NOAA weather channels, a seven-color display, RF gain, microphone gain, built-in talkback, and an SWR meter with calibration. Both stations must use the same CB channel and mode to communicate.
Included components
| Component | Quantity | What it provides |
|---|---|---|
| Uniden Bearcat 880FM | 1 | AM/FM CB radio with standard microphone, power cord, and mounting hardware |
| Stryker SR-A10 antenna | 1 | Threaded CB/10-meter antenna with 49-inch whip |
| Driver Extreme DRX-3402 mount | 1 | Heavy-duty double-slotted mirror mount with antenna stud |
| Driver Extreme DRX-1518 coax | 1 | 18-foot M213 antenna coax with PL-259 connectors |
Check fit before installation
Confirm that the DRX-3402 mounting arrangement fits your mirror support and that the support can carry the antenna assembly. The threaded SR-A10 uses a 3/8-24 antenna connection; this package does not include the SR-A10 magnetic-mount version.
The antenna's 49-inch whip measurement is not the total installed height. Account for the antenna base, mounting position, and overhead clearance. Route the coax away from pinch points and provide an appropriate RF ground connection for the mounting location.
Antenna setup and adjustment
Connect the coax between the radio's antenna socket and the mount's coax connection. Check SWR after installation and adjust the antenna system as needed using the radio's meter and calibration function.
The supplied 18-foot cable is a physical routing length, not a substitute for antenna adjustment. This package does not include an external speaker or an upgraded microphone.
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
Other Bearcat 880FM packages
- Bearcat 880FM radio only
- Virginia magnetic-mount starter combo
- Driver Extreme microphone and speaker audio combo
- Hustler 102-inch whip with RG8X installation kit
- Hustler 102-inch whip with Driver Extreme mirror mount and M213 coax
Frequently asked questions
Is this the magnetic-mount SR-A10?
No. This combo contains the threaded SR-A10 antenna and a separate Driver Extreme DRX-3402 mirror mount.
How much coax is included?
The DRX-1518 is an 18-foot M213 coax cable with PL-259 connectors.
Will this mount fit every truck?
No universal truck fit is promised. Check your mirror support's dimensions, mounting access, strength, and grounding arrangement before choosing this package.
Is the antenna only 49 inches tall when installed?
No. The 49-inch figure describes the whip. The antenna base and mounting position add to the complete installation height.
Is the antenna ready to use without checking SWR?
Check SWR on the completed vehicle installation before transmitting. The radio's built-in meter helps with that check but does not automatically tune the antenna.
Is an external speaker included?
No. This package contains the radio, antenna, mirror mount, and coax. The radio includes its standard microphone and internal speaker.