President Washington 10 Meter Radio, President DIGIMIKE 6 Pin Noise Reducing Microphone, Combo
President Washington 10 Meter Radio + President DIGIMIKE 6-Pin Noise Reducing Microphone Combo
The President Washington — President Electronics' flagship desktop-style 10 and 12 meter amateur radio, now shipping in its updated 100W+ configuration — paired with the President DIGIMIKE, the direct 6-pin mic upgrade with built-in NRC noise reduction. Everything you need to run the Washington on 10m with the microphone connector matched, quieted, and ready for use.
The Washington uses a 6-pin front microphone jack, which is not compatible with standard 4-pin CB microphones. The DIGIMIKE is the direct President-brand solution — matched connector, NRC noise reduction with 5 levels, and clean up/down channel control on the mic body.
Who this combo is for
- Truckers upgrading from a stock or 4-pin CB mic. The DIGIMIKE cuts diesel drone and cab noise significantly and matches the Washington's 6-pin connector natively.
- Washington owners who want the OEM mic path without going wireless. The DIGIMIKE is the wired version of President's 6-pin noise-cancelling family — proven, simple, no batteries to keep charged.
- Base station operators who want a clean SSB signal. The 5-level NRC filter is especially helpful for punching through noise on long SSB DX contacts.
- Anyone who wants microphone up/down channel control. The DIGIMIKE's up/down buttons let you change channels without reaching for the front panel.
What's included in this combo
- 1 × President Washington 10 meter radio (100W+ AM/SSB PEP, 45W FM, all versions supported)
- 1 × President DIGIMIKE 6-pin noise-reducing microphone
President Washington — key specs
| Modes | AM, FM, USB, LSB, PA |
| Frequency coverage | 28.000–29.700 MHz (10m) + 24.890–24.990 MHz (12m) |
| Power output | 100W+ AM/SSB PEP, 45W FM |
| Mic connector | 6-pin front jack + rear VOX jack |
| Repeater support | CTCSS + DCS tone encode/decode |
| Memory / scan | 4-channel memory + Scan / Scan Skip / Dual Watch |
| Cooling | Two internal fan headers — supports up to 2 × President ACMD901 fans (fans sold separately) |
| APM | Automatic Power Management temperature control |
| Size (W × D × H) | 7.28 × 6.77 × 2.2 in / 185 × 172 × 56 mm |
| Warranty | 2 years standard, extended to 5 years when purchased with a President-brand antenna |
President DIGIMIKE — features
- Direct 6-pin connection to the Washington's front mic jack
- NRC (Noise Reduction Circuit) filter with 5 selectable levels
- Push-to-Talk (PTT) with reliable spring-loaded action
- Up/Down channel selection on the mic body
- Compatible with VOX mode via the Washington's rear VOX jack
- No adapter or rewiring required
Optional cooling upgrade
The Washington ships without a cooling fan by default. President Electronics designed it with two internal fan headers so you can add their factory-approved cooling fans as an add-on. If you plan on long transmissions, heavy repeater duty, or high-duty-cycle base operation, add one of these to your order:
- Single President ACMD901 fan kit — one factory-approved fan for standard operation
- Dual ACMD901 fan kit — two-pack for the manufacturer's maximum-cooling configuration
- Washington dual fan installation service — two fans installed at our bench before the radio ships
Prefer everything in one line item? See the Washington + installed dual fan combo.
License requirement
The Washington operates on the 10 and 12 meter amateur (ham) radio bands. FCC amateur radio licensing is required to transmit. Technician-class licenses cover 10m; General or Amateur Extra required for 12m transmit. Full details on our 10 meter radio licensing page.
Pro Tune & Alignment
Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.
Frequently asked questions
Does this combo include a cooling fan?
No. The Washington ships without a fan by default, and this combo covers the radio and the DIGIMIKE microphone only. For cooling, add the single ACMD901 fan kit, the dual ACMD901 kit, or the professional fan installation service to your order.
What's the difference between the DIGIMIKE and the BT Mike?
Both are President 6-pin microphones with NRC noise reduction. The DIGIMIKE is wired and simple — plug it in and it works. The BT Mike is Bluetooth-based for hands-free operation. Choose the DIGIMIKE if you want the traditional wired experience and don't need to keep another battery charged.
What antenna and coax should I pair with this combo?
For a mirror-mount trucker install, pair with the Stryker SR-A10 antenna, DRX-3402 mirror mount, and DRX-1518 18-ft M213 coax. For a no-drill install, use the Stryker SR-A10MM magnetic-mount antenna. For range and output, President antennas also extend the Washington's warranty to 5 years — see the President antennas collection.
Do I need a license to operate the Washington?
Yes. The Washington is a 10 and 12 meter amateur radio. FCC amateur radio licensing is required to transmit. See our 10 meter radio licensing page for the full details.
Ready to order
Add this Washington + DIGIMIKE combo to your cart. For maximum-cooling operation, also add the ACMD901 fan kit, dual ACMD901 kit, or fan installation service. Don't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual. Or shop the full President 10 meter radios collection.